Home | E-mail  


MAGNA-GUARD, Inc.

858.598.5279

 

MAGNA-GUARD

Engine Protection System

 

bullet Oil Filter Magnets
bullet ONE-Drop Instant Lubricants Test

 

The Truth About Motor Oil and Your Car . . . . .

Ever wonder what turns your motor oil from a golden amber lubricant to that icky black mess after a few thousand miles?

Even under the best driving conditions and with the most meticulous maintenance, your engine will shed a little metal, tiny particles of grit in the oil. To provide adequate lubrication for your engine, oil filters are designed to pass oil freely. Therefore, a certain number of these tiny particles, or grit, will pass through the filter's porous element.

As grit builds up in the oil, friction and wear increases causing the engine to run hotter. The oil begins to break down. Sludge then forms and the oil loses its ability to protect your engine. Unfortunately changing your filter and oil does not remove all the grit and/or sludge from your engine.

 

 

Magna-Guard removes 40-times more grit than your filter alone,
prevents friction & premature engine wear!

Engine runs better:
Reduced wear allows for a tighter seal between pistons and rings. This improves compression and allows for more complete combustion.

Lasts longer:
Removing grit from oil reduces friction and wear. *SAE (Society of Automotive Engineers) documents an 8 to 14-times reduction in wear.

Better gas mileage:
Improved combustion coupled with reduced friction gives you more miles per gallon. *SAE documents a 3.7 to 5% increase in fuel economy.

Less pollution:
A cleaner burning, more efficient engine pollutes less. Independent laboratory tests documented an 18% reduction in toxic-tailpipe emissions with Magna-Guard.

Reduces overall maintenance and operating costs:
Your engine will use less fuel, require fewer repairs and last longer.

Magna-Guard removes 40-times more grit than a filter alone:
Standard oil filters remove particles 20 to 30-microns and larger. Magna-Guard added to these same filters controls particle contamination down to 0.5-microns.


*SAE Technical Papers 881827, 881825 & 95255 documented benefits by controlling particle contamination in the 10-micron range. Adding Magna-Guard is documented to control particle contamination down to 0.5-microns. This is a 20-times improvement in particle control over the SAE Technical Papers and resulting benefits.

 

Copyright 2003 - Magna-Guard, Inc.- All Rights Reserved

 

[ Home ] Contact ] [ About Us ] [ Products ] [ Science ] [ Endorsements ] [ Relevant Links ]